| XL Open Grips (3) |
 |
The Open Grip is the most popular multiple use grip in use throughout the world. It comprises a barrel and a wedge. The wedge is in two segments for wire and three segments for strand. The wedge segments are held together with an '0' ring the grips are highly economical with few components and may be inspected during use. They also provide ease of detensioning and cleaning.
Used at the live end (Stressing) of the bed.
Available is sizes; 3mm 4mm 5mm 6mm 7mm 8mm 9.6mm 11mm 13mm 15mm 18mm
|
|
| XL SLA Threaded Grips (3) |
 |
SLA (Spring Loaded Anchor) Threaded grips should normally be used at the non-stressing end of a bed, but if prestressing is carried out using a jack without power lock-off, spring loaded anchors should also be used at the stressing end of the bed. The threaded cap type anchor incorporates the same type of wedge as the open grip, but has a longer barrel, a spring and a threaded cap. Two threaded cap type anchors may be used with a centre plug to form a double-ended joint.
Used at the Dead End (Non-Stressing) of the bed
Available is sizes; 3mm 4mm 5mm 6mm 7mm 8mm 9.6mm 11mm 13mm 15mm 18mm
|
|
| XL Bayonet Grips (3) |
 |
The XL Bayonet cap type anchor features quick and easy release to facilitate inspection and cleaning of the wedges. Bayonet grips should normally be used at the non-stressing end of a bed. CCL XL2 Bayonet cap type anchors offer the advantage over the threaded cap type that there is a lower likelihood of damage to the cap during prestressing. The caps are cast from high quality cast steel to provide efficient use and durability.
Used at the Dead End (Non-Stressing) of the bed
Available is sizes; 3mm 4mm 5mm 6mm 7mm 8mm 9.6mm 11mm 13mm 15mm 18mm |
|
| XL DEJ Double Ended Joints (3) |
 |
In some situations it may-be necessary to connect two lengths of wire together. For example, it may be possible to re-use wire when only part of the prestressing bed is in use. CCL Double Ended Joints are used to achieve such a joint. They consist of two tapered barrels, each containing a wedge and a spring. The two are joined together by means of a knurled centre plug, which makes assembly simple and safe. The chamfered ends of the joints are designed to help reduce the likelihood of one joint becoming trapped against another during the prestressing process.
Used to connect similar (Same size/grade)strand/wire between the anchoring points.
Available is sizes; 3mm 4mm 5mm 6mm 7mm 8mm 9.6mm 11mm 13mm 15mm 18mm
|
|
