Available is sizes:
2 x 2.25mm
3 x 2.25mm
3 x 2.50mm
3 x 3.00mm
The SLA anchor incorporates the same type of wedge as the open grip, but has a
longer barrel, a spring and a threaded cap. The wedge is
in three segments for strand and are held together with an '0' ring. Threaded grips should normally be
used at the non-stressing end of a bed, but if prestressing is carried
out using a jack without power lock-off, spring loaded anchors should
also be used at the stressing end of the bed. Two threaded cap type
anchors are used with a centre plug to form a double-ended joint.
The CCL Item codes for the XL SLA Ply-Wire Grips are as follows:- Ply-wire Metric
| Ply-wire Imperial
| Grip Code
| | 2 x 2.25mm | 2 x 0.088" | 635011 | | 3 x 2.25mm | 3 x 0.088" | 635010 | | 3 x 2.50mm | 3 x 0.098" | 635009 | | 3 x 3.00mm | 3 x 0.118" | 635008 |
|
